1、 Preliminary preparation
Measurement and Planning
Accurately measuring the dimensions of the installation position is crucial. Consider the length, width, and installation height of the extended sunshade canopy to ensure that it can fully cover the areas that require shade and will not collide with surrounding buildings, trees, or other obstacles. For example, when installing on a balcony, it is necessary to measure the length and width of the balcony, as well as pay attention to the height and position of the balcony railing to avoid affecting the normal use of the railing after the canopy is unfolded.
Plan the installation direction of the canopy based on shading requirements and site conditions. Generally speaking, installation should be carried out at an angle that can block direct sunlight to the greatest extent possible, such as in areas with strong sunlight exposure facing south or west. When installing, it is important to focus on blocking sunlight in these directions.
Assessment of structural bearing capacity
It is necessary to ensure that the building structure at the installation location can withstand the weight of the electric sunshade canopy. The weight of different types and sizes of canopies varies, and it is necessary to consult the manufacturer for specific weight data. For example, for a canopy installed on a rooftop terrace, it is necessary to check the load-bearing capacity of the roof, especially for some old-fashioned or lightweight structural buildings, which may require reinforcement treatment before installation.
Power supply and wiring
Electric sunshade canopies require electric drive, so it is necessary to plan the power supply location in advance. The power supply should be placed as close as possible to the installation location, and consideration should be given to the safety and aesthetics of the wiring. When installing, use wires and sockets that meet safety standards, and it is best to hire a professional electrician for wiring to avoid safety hazards such as electrical leakage. When installing outdoors, it is also necessary to consider waterproof and moisture-proof issues, such as using waterproof sockets and sealed electrical conduits.
2、 Installation process
Component inspection and installation sequence
Before installation, carefully inspect all components of the sunshade canopy, including the motor, track, sunshade cloth, etc., to ensure that there are no damaged or missing parts. Install according to the manufacturer's installation instructions. Generally, the track should be installed first to ensure the horizontal and vertical accuracy of the track. The error should be controlled within the allowable range to ensure smooth operation of the canopy during operation.
When installing the motor, it is necessary to strictly follow the installation instructions of the motor, pay attention to the correct wiring of the motor, and conduct debugging to ensure that the motor rotates normally in both directions, runs smoothly, and has no abnormal noise.
Installation of sunshade cloth
When installing sunshade cloth, be careful to avoid it being scratched or dirty. Some sunshade cloths are relatively fragile, so be careful when unfolding and fixing them. Ensure that the sunshade cloth is securely installed on the track and can be smoothly unfolded and retracted as the track runs. At the same time, it is necessary to check whether the joints of the sunshade cloth are tight and without gaps to ensure the sunshade effect.
Secure fixation and windproof measures
After installation, the sunshade canopy should be securely fixed. Check if all installation screws and bolts are tightened. For canopies installed at heights or outdoors that are easily affected by wind, effective windproof measures should be taken. For example, windproof cables can be installed to connect the canopy to the surrounding sturdy structure, enhancing its wind resistance and avoiding damage from strong winds.

3、 Post maintenance
Cleaning and maintenance
Regularly clean the sunshade cloth to prevent the accumulation of dust and stains from affecting the sunshade effect and appearance. Gentle cleaning agents and soft cloths can be used for wiping. At the same time, it is necessary to maintain the motor and track, regularly add lubricating oil, and maintain the good performance of the motor and the smoothness of the track.
Inspection and Maintenance
Regularly inspect all components of the sunshade canopy, including whether the sunshade cloth is damaged, whether the motor is operating normally, and whether the track is deformed. Once a problem is discovered, it should be repaired in a timely manner to avoid the problem from escalating. If encountering complex faults, it is best to contact professional maintenance personnel for handling.